saddevil schrieb:
5-10% tastverhältniss bestehen bleibt
Hi
Das versteh ich nicht... kannst Du mir dies bitte so beschreiben dass ich das Umsetzen kann?
Best Fishes!
Dani
Dani
Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen
saddevil schrieb:
5-10% tastverhältniss bestehen bleibt
The current generation Sol light fixtures use Cree XP series LEDs which run between 2 and 3 watts each. More specifically, the XP-G cool white LEDs run at 2.65 watts each and the XP-E blue and royal blue run at 2.3 watts each. This means that at full power, each module pulls less than 75 watts of electricity.
According to Cree, the manufacturer of the LEDs, the LEDs will produce up to 50,000 hours of usable light. Our products follow the strict guidelines provided by Cree to work to achieve this life span. Assuming a 10 hour per day photoperiod, your AI System will last well over 5-7 years. (According to Cree’s calculation, with a 10 hour photoperiod each LED will last over 13 years!)
Hypocampo schrieb:
Das versteh ich nicht... kannst Du mir dies bitte so beschreiben dass ich das Umsetzen kann?
saddevil schrieb:
wenn man nun davon ausgeht das bei 100% leistung die LEDs kein tastverhältniss haben ... ist es also besser die LEDs mit max 90% hellgkeit zu fahren
saddevil schrieb:
Hypocampo schrieb:
Das versteh ich nicht... kannst Du mir dies bitte so beschreiben dass ich das Umsetzen kann?
DIe leds werdne zwar mit konstantstrom betrieben .. aber die helligkeit wird oft durch PWM gesteuert.
meist zwischen 200 und 1000Hz
quasi ein ganz schnelles AN/AUS ...
0% -- immer AUS
100% -- immer AN
100% - kein tastverhältnis also der Strom ist konstant an
50% 50% der zeit ist die LED aus und 50% der zeit ist die LED an also auch 50% energiebedarf
10% 90% der zeit Aus und 10% der zeit an
wenn man nun davon ausgeht das bei 100% leistung die LEDs kein tastverhältniss haben ... ist es also besser die LEDs mit max 90% hellgkeit zu fahren
dabei bleiben immer 10% lso resttastverhältnis übrig wo die LED stomlos ist
Hypocampo schrieb:
Ich habe mal um Erklärung gebeten...
Hi Dani
You are correct that they do have a possible life expectancy of up to 50K hours. However, this is simply a rating they provide. Many of our users have had the LEDs for 5+ years with little replacements, however every situation differs. Without seeing the LEDs and testing them, it's hard to tell why these would have given out however.
Of course, the Cree LEDs we use are for aquarium lights vs. fixtures that other companies use the LEDs for. Rigors of the aquarium world (salt creep, power outages/surges etc) can play a dramatic decrease in the longevity as well. Not to say this the case here of course.
saddevil schrieb:
Bei meiner DIY funzel hab ich ein paar LEDs mehr drin und hab "nur" 700mA ...
ist effizienter und nochmal mehr leistung
MarcoBO schrieb:
Hab heute festgestellt, dass bei meiner AI Sol sämtliche blauen LED's ausgefallen sind
Holger schrieb:
Kannst Du mal Bilder der Vorschaltgeräte hier einstellen ?
Holger schrieb:
Meine Erfahrung bzgl. defekter LED-Lampen: zu 90% liegt es am Steuergerät. Der Rest ist schlechte Verarbeitung = schlechte Lötstellen.
Würde mich nicht wundern, wenn bei Euren defekten Modulen immer "nur" 1 LED defekt ist oder gar nur eine Lötstelle kalt
Holger schrieb:
Ist das alles ?
Da ist noch eine Steuerung in der Lampe, oder ?
Das Ding ist ein simples Netzteil.